BVXQD - R-64-1001 EPL LASER TYPE TONER
- MSDS: BVXQD
- Manufacturer: WESTERN DUPLICATING SUPPLIES
- Product Name: R-64-1001 EPL LASER TYPE TONER
- National Stock Number: 6850-00N054427
Product Identification
Product ID:R-64-1001 EPL LASER TYPE TONER
MSDS Date:03/01/1991
FSC:6850
NIIN:00N054427
MSDS Number: BVXQD
Responsible Party
SEATTLE, WA 98108
US
Emergency Phone: 206-767-5323
Info Phone: 206-767-5323
Cage: 0JPG6
Contractor
Telephone: 206-767-5323
Cage: 0JPG6
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9394
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EXCESSIVE INHALATION CAN CAUSE
IRRITATION TO THE RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . EYES:FLUSH WITH WATER FOR @ LEAST 15 MINUTES. SKIN:WASH
WITH SOAP & WATER. INGEST:RINSE MOUTH WITH WATER, CONSULT PHYSICIAN
FO R MEDICAL ADVICE.
Fire Fighting
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE.
Accidental Release
Spill Release Procedures:REMOVE ANY SOURCE OF IGNITION. MAY BE SWEPT
UP. AVOID DUST INHALATION (USE NIOSH/MSHA APPRVD DUST MASK IF
NECESSARY).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:NONE KNOWN.
Exposure Controls
Respiratory Protection:NORMALLY NONE REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMALLY NONE REQUIRED.
Protective Gloves:NORMALLY NONE REQUIRED.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:-0-
Spec Gravity:1.5-1.7(H*20=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD RESINOUS ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:POSSIBLE CO AND CO*2 DURING THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.